Course Content and Outcomes Guides (CCOG)

CCOG for MCH 115A archive revision 201904

You are viewing an old version of the CCOG. View current version »

Effective Term:
Fall 2019 through Fall 2024

Course Number:
MCH 115A
Course Title:
Geometric Dimensioning and Tolerancing I
Credit Hours:
2
Lecture Hours:
0
Lecture/Lab Hours:
40
Lab Hours:
0

Course Description

Covers the use of geometric dimensioning and tolerancing (GDT) as specified by the American Society of Mechanical Engineers in specification ASME Y14.5-2009. Introduces the symbols, concepts, and basic use of these techniques for dimensioning and tolerancing used in standard industry practice. This course is also offered as APR 115M; a student who enrolls in this course a second time under either designator will be subject to the course repeat policy. Audit available.

Addendum to Course Description

GD&T I is presents a subset of GD&T that will be of use to beginning machinists.

Students interested in continuing into Metrology or Engineering should also complete GD&T II

TEXT:

A Practical Guide to Geometric Tolerancing per ASME Y14.5-2009 by Scott Neumann and Al Neumann.  ISBN 087263865-0    

Intended Outcomes for the course

Upon completion of the course students should be able to:

  • Read and understand basic GDT symbols on a print.

  • Explain basic GDT concepts.

  • Identify minimum and maximum material conditions.

  • Measure and verify position tolerances with applied material conditions.

  • Set up and use basic rectangular datum reference frames.

Aspirational Goals

This course is intended to provide a basic introduction aimed at beginning machinists

Course Activities and Design

MCH 115A will be presented by means of audio visual presentations, demonstrations, and research activities. The course activities and design emphasize the development of skills and knowledge outcomes prescribed by established industry standards. The identified outcomes will be achieved by means of individual and team activities.  

Outcome Assessment Strategies

The final grade will be based on the average of a mid-term and a final exam and one lab exercise.  The exams present problems related to tolerances similar to those presented in the textbook exercises.  The lab exercise will give the student the opportunity to practice techniques covered in the class.

Course Content (Themes, Concepts, Issues and Skills)

Text Section 1 - Introduction – symbols and Terms

Text Section 2 - Limits of size

Text Section 3 - How the Geometric System Works

Text Section 4 - Position Verification

Text Section 5 - Product Plans and Virtual Condition

Text Section 6 - The Datum reference Frame

Text Section 10 - Form Tolerances

Text Section 11 - Orientation Tolerances