CCOG for MCH 190 archive revision 201904

You are viewing an old version of the CCOG. View current version »

Effective Term:
Fall 2019

Course Number:
MCH 190
Course Title:
Boring on the Lathe
Credit Hours:
1
Lecture Hours:
0
Lecture/Lab Hours:
20
Lab Hours:
0

Course Description

Covers setup, applications and operation of boring on the lathe. Introduces the commonly performed operation of boring on the various types of turning machines used to produce part features to print specifications. Audit available.

Addendum to Course Description

Boring on the Lathe - Boring is the operation of enlarging and truing a drilled hole. A bored hole is always held to a closer tolerance than a drilled hole. It is also concentric with the center line of the work piece. Boring a second hole that is larger than the first but concentric with it, is called counterboring. A tapered hole can also be cut using a taper attachment. In this packet, you will learn how to bore and cut a tapered hole on the lathe.  

PREREQUISITE SKILLS AND KNOWLEDGE:  
MCH180  

Intended Outcomes for the course

 
The student will be able to turn safely and accurately an exercise piece to print specifications using the set-up methods and proper tools used for boring operations associated with the lathe machine. 

Course Activities and Design

 
MCH 190 will be presented by means of audio-visual presentations, demonstrations, lab experiences, and research activities. The course activities and design emphasize the development of skills and knowledge outcomes prescribed by established industry standards. The identified outcomes will be achieved by means of individual and team activities.

Outcome Assessment Strategies

POLICY - Student performance measurements are based on established industry standards. The various areas of study during the course will be evaluated by a variety of activities. Typical of those activities are the following;

1. READING ASSIGNMENTS - Information sheets, textbooks, journal articles and the learning resource center are potential sources of information that the student will reference as directed in the modules identified in the introduction. 

2. PRACTICE - Completion of tasks and projects identified in the reading assignments, information sheets, journal articles and textbooks. Students are required to complete practice activities with 100% competency.

3. SELF-ASSESSMENT - Checking and evaluating the students understanding and knowledge gained through the reading assignments and practices typically done through a practice evaluation.

4. LAB ACTIVITIES - Participation in structured laboratory exercises with the emphasis on developing skills or increasing expertise in the areas of study identified in the module packets.

5. FINAL ASSESSMENT - An assessment in the form of a written exam and/or practical application that addresses the subject areas identified in the module packets. Students are required to complete final assessment activities with 85% competency.  

TEXT:  

Machinery's Handbook

Technology of Machine Tools by Krar, Oswald, and St.Amand

Machine Tool Practices, by Kibbe, Neely, Meyer, and White

Course Content (Themes, Concepts, Issues and Skills)

This course is based on performance outcomes. The following performance outcomes are based upon established industry standards. The student will demonstrate knowledge and understanding through the following activities:  

  • Given the necessary materials, tools, and equipment, the student will use a boring bar to machine an internal taper to print specifications +/- 30 minutes.